Home » Electronics & Semiconductors » mycon creates new possibilities for the use of the JetMaster system in the cleaning of heat transfer systems

mycon creates new possibilities for the use of the JetMaster system in the cleaning of heat transfer systems




An additional blasting device also makes it possible to clean e.g. built-in oil coolers in locomotives gently, quickly and thoroughly at full depth within a few minutes. The effort required for manual cleaning is considerably reduced compared to previous cleaning methods. This protects and preserves the manpower of the employee responsible for cleaning. The comment of the responsible engineer for the area at a railway customer \”only light cleaning is detailed cleaning\” was taken into account in the development of the blasting device.

Reduction of noise level and splashing water

There are sensitive working areas in which the increased noise level is disturbing. This is the case, for example, when other employees work in the immediate vicinity of the work site, who would then have to wear all hearing protection. mycon has developed sound insulation measures especially for these areas, which are installed directly on the blast gun and considerably reduce the sound level. As a result, the application range of the JetMaster process has been further extended. With the reduction of the sound level and a reduction of the splash water is reached same time also that with impact of the jet on the surface of the heat exchanger. However, the quantity is small as less than one litre of water per minute is used.?

The JetMaster system operates at high air flow rates. This leads to an increased noise level. This sound level depends on the jet nozzle used and the pressure of the compressed air and can be between 90-115 dB. The operator must therefore wear hearing protection during cleaning. However, the noise level decreases considerably as the distance to the blasting gun increases. The extent to which hearing protection is required for other employees depends on the local situation.?

About Kipp Umwelttechnik GmbH, www.kipp-umwelttechnik.de

In the field of industrial cleaning, Kipp Umwelttechnik GmbH is the specialist for thorough and gentle cleaning in industry and for building cleaning.

Kipp Umwelttechnik GmbH was founded in 1991 as a sister company to the construction company Jens W. Kipp Tiefbau GmbH, which has existed since 1971. Both companies are businesses managed by entrepreneurs.

mycon GmbH has added to the group made up of Kipp Umwelttechnik GmbH and Jens W. Kipp Tiefbau GmbH since 2002.

About mycon GmbH, www.mycon.info

As a sister company to the service business Kipp Umwelttechnik GmbH, mycon GmbH is involved with the development, production and sale of new products and automation technologies.

mycon GmbH currently supplies to customers in approx. 40 countries.

Many years of experience from the field of industry service led to several systems developments and patents, some of which with international recognition. mycon GmbH takes care of customer groups from a variety of industry and service fields.





Posted by on 2. August 2019. Filed under Electronics & Semiconductors. You can follow any responses to this entry through the RSS 2.0. You can leave a response or trackback to this entry

Leave a Reply

Archive

© 2019 So-Co-IT. All Rights Reserved. Log in - Copyright by LayerMedia


Blogverzeichnis - Blog Verzeichnis bloggerei.de Blog Top Liste - by TopBlogs.de Bloggeramt.de