Home » Networking, Picture Gallery » Polymer hybrid aluminum electrolytic capacitors for the new mobile communications standard 5G

Polymer hybrid aluminum electrolytic capacitors for the new mobile communications standard 5G


The polymer hybrid aluminum electrolytic capacitors are an excellent replacement for both Multilayer Ceramic Capacitors (MLCC) and tantalum capacitors. They have several advantages in comparison to MLCCs and tantalum capacitors like an increased vibration resistance up to 30G and high reliability and long life. Crack formation or even fractures within the component are not possible. Another advantage is their stable behavior as a function of temperature change and at high frequency. They have no DC bias, no acoustic noise (piezo effect) and are not flammable. In addition unlike tantalum capacitors no voltage derating is required and high alternating current load capabilities in the Ampere range are possible. Another major advantage is that they are going to the open state in the event of a failure and do not cause a short circuit. Furthermore a large number of MLCCs can be replaced by just one polymer hybrid capacitor or a combination of both which saves space and costs for the assembled printed circuit board.
In view of these advantages the polymer hybrid aluminum electrolytic capacitor is now widely used for example in the input and output stage of DC/DC converters which are also used in the base stations of the 5G transmission standard. The small construction form enable a low ESR (Equivalent Series Resistance), high AC load capabilities (IR) and they have a long life at temperatures from 105?C up to 135?C. The rated voltage range (UN) is currently from 6.3V to 100V, the rated capacitance range from 10?F to 820?F and the upper temperature range is 135?C.
Polymer hybrid aluminum electrolytic capacitors can be used for example in the following applications:
Embedded systems, electric drives, base stations, routers, servers, wireless radio applications, meters and measurement instruments, DC/DC converters, EMC filters, automotive applications (e.g. EPS, ECU, ABS, HVAC, ADAS, AFS, EPB, electric water and fuel pump, blower cooling, audio and navigation systems), LED lighting etc.
First samles of the ELNA conductive polymer hybrid aluminum electrolytic capacitors are available at BECK Elektronik as exclusive partner of ELNA. Please contact your sales partner or use the contact form on our website.


Posted by on 2. July 2020. Filed under Networking, Picture Gallery. You can follow any responses to this entry through the RSS 2.0. You can leave a response or trackback to this entry

You must be logged in to post a comment Login


Recent Comments

    © 2021 So-Co-IT. All Rights Reserved. Log in

    - Copyright by LayerMedia

    Blogverzeichnis - Blog Verzeichnis bloggerei.de Blog Top Liste - by TopBlogs.de Bloggeramt.de